- Call Us:
- +90 212 274 89 87
Products
If it is hard for you, leave it to us...
Hydraulic Scissor Lift Platform
To conveniently and safely transport equipment or vehicles from one level to another, goods lifts are needed. The following items should be clear to create and propose a project design for goods lifts.
A) Load capacity,
B) Min-max height,
C) Platform size
After this information is obtained, the most appropriate system is mutually agreed upon and proposed. Lifts may be installed into or alternatively above the foundation. We are capable of manufacturing traction and hydraulic goods lifts of any tonnage and size.
TECHNICAL SPECIFICATIONS
A) GENERAL FEATURES
Full Safety Hydraulic System
Full Safety Electric System
Maintenance free bedding system produced of special materials
Electrohydraulic control of the platform from the ground
Adjustable switch speed
Possibility to be carried by a forklift
Safe balance in maximum load and position
D) SAFETY EQUIPMENT
For an operation that will not pose a threat to personnel, the machine is equipped with many safety devices that control whether different sections are functioning properly and which are switched on in case of malfunction or error.
In case of power failure, it is possible to manually lower the platform to the desired position with the auxiliary landing lever.
- Emergency stop button is located on the panel for emergency use.
- Control panel protects itself in case of low energy.
- A safety valve is provided on the system that prevents free fall in the hose burst.
C) ELECTRICAL GROUP AND THE CONTROL PANEL
We use state-of-the-art techniques in the design of our electrical equipment to respond quickly to customer-requested demands, reduce maintenance costs, and improve and enhance the effectiveness of operators.
- The electric panel will carry the specifications of IP65 protection class, resistant to external environment.
- Used switches are Telemecanic brand.
- All the equipment and switches that will make up the electric panel are Siemens and Telemecanic brand.
- Thermal and relays that protect the system against phase cuts or engine failures are available in the panel assembly.
- A control box made up of globally recognized brands.
- The machine is designed according to 3 phase electrical system. (380 V, 50 Hz)
The energy transfer line where the system will operate must be done by you.
F) PAINT AND WARNING LABELS
Since the switch platforms are exposed to the open air and the difficult working conditions, they are painted in professional hands with industrial paint on the primer and are prepared for the shipment after the warning labels are added.
